穿戴式下肢外骨骼机器人的结构设计与仿真
孙明艳，胡军，刘有海，陈金明，马绍兴，张新疆
（中国工程物理研究院 机械制造工艺研究所，四川 绵阳 621900）
摘要：设计了一种下肢外骨骼装置，主要由髋关节、膝关节、踝关节和驱动装置组成，其中膝关节部分采用了四杆机构替代传统的单自由度转动副结构，提高了膝关节的仿生性，驱动装置采用了电机驱动。对髋、膝、踝三关节采用Adams进行了运动学仿真分析，获得了三个关节的输出角度数据，通过与输入角度数据的对比，验证了该下肢外骨骼装置与人体行走姿态具有良好的跟随性。同时通过对膝关节四杆机构的结构设计与运动学仿真分析的交互叠代，优化了膝关节四杆机构的设计参数。
关键词：外骨骼；机器人；机械结构；仿真
中图分类号：TP242 文献标志码：A doi：10.3969/j.issn.1006-0316.2016.01.011
文章编号：1006－0316 (2016) 01－0043－06
Structure design and simulation of wearable lower extremity exoskeleton robot
SUN Mingyan，HU Jun，LIU Youhai，CHEN Jinming，MA Shaoxing，ZHANG Xinjiang
( Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, China )
Abstract：In this paper, we designed a lower extremity exoskeleton device, which is mainly composed of hip, knee, ankle joint and driving device. Among them, knee joint was designed by using four-bar mechanism to replace traditional single degree of freedom revolute joint structure, which improved the bionics of knee joint, while driving device is electric motor. Then we obtained output angle data of hip, knee, ankle joint by way of Adams kinematics simulation and also proved that the lower extremity exoskeleton device can follow the human walking posture very well by comparing angle data of input and output. Finally, through interactive iteration of structure design and kinematics simulation, we optimized the structure parameter of four-bar mechanism knee joint
Key words：exoskeleton；robot；mechanical structure；simulation
———————————————
收稿日期：2015－06－05
作者简介：孙明艳（1988－），女，四川德阳人，硕士，助理工程师，主要研究方向为机械及机器人、机械工程材料。
- 上一篇：钻具稳定器专用数控机床设计
- 下一篇：按摩机器人捏拿机构的优化设计
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS