PCB数控钻床直线电机进给工作台的力学性能分析

 杨刚1,周松霖2,蔡长韬2,周彦君2,马飞达1

(1.成都金大立科技有限公司,四川 成都 611930;2.西华大学 机械工程学院,四川 成都 610039)
摘要:PCB数控钻床直线电机进给工作台的力学特性是影响加工精度的主要因素之一,对机床的精度和效率有直接的影响。基于此,将直线电机和工作台作为一体化结构,利用有限元法对直线电机进给工作台进行静力学和动力学分析。得出工作台的最大变形量位置及影响加工精度的因素。根据分析结果,为工作台结构进一步的改进提供了依据。
关键词:PCB数控钻床;直线电机进给工作台;钻孔精度;静力学;动力学
中图分类号:TG527 文献标志码:A doi:10.3969/j.issn.1006-0316.2016.02.005
文章编号:1006-0316 (2016) 02-0018-04
Mechanical property analysis on linear motor feed worktable of the PCB NC drilling machine
YANG Gang1,ZHOU Songlin2,CAI Changtao2,ZHOU Yanjun2,MA Feida1
( 1.Chengdu Jindali Technology Co., Ltd., Chengdu 611930, China; 2.College of Mechanical Engineering, Xihua University, Chengdu 610039, China )
Abstract:The mechanical properties of linear motor feed worktable is one of the main factors affecting the machining accuracy. It has directly influenced on the PCB NC drilling machine’s precision and efficiency. By using finite element method for linear feed workbench, this paper goes on statics analysis and dynamic analysis. 
It have got the maximum deformation position of table and the factors influencing machining accuracy. It has the significance value of engineering application to provide a theoretical basis for the worktable.
Key words:PCB machine tool;linear motor;Drilling precision;Statics;Dynamics
———————————————
收稿日期:2015-07-01
基金项目:四川省科技支撑计划项目(15ZC2176);西华大学研究生创新基金项目(ycjj2015075)
作者简介:杨刚(1964-),男,四川彭州人,硕士,高级工程师,主要研究方向为数控技术。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS