旋转式多工位感应钎焊设备设计
朱文娟1，来跃深1，张永刚1，常宏2，屠金磊3
（1.西安工业大学 机电工程学院，陕西 西安710021；2.深圳市北辰亿科科技有限公司 西安研发中心，陕西 西安710065；3. 北京衡扬科技发展有限公司，北京 101300）
摘要：根据高频感应钎焊工艺要求，并针对待焊管路件的特点，设计了一种感应钎焊设备。主要对该设备的总体结构进行设计，主要包括工装夹具的设计，气动部分的结构设计，凸轮分割器、电机及气缸的选型计算。整合工装与加热系统，实现对管路件的自动化焊接。工装夹具采用快速夹钳与三关节扶正装置相结合的方式。气动部分主要利用气缸和浮动接头实现感应器的往复运动。
关键词：管路件；多工位；感应钎焊；自动焊接；工装夹具
中图分类号：TG439.1 文献标志码：A doi：10.3969/j.issn.1006-0316.2016.04.017
文章编号：1006－0316 (2016) 04－0077－04
Design of rotary multi station induction brazing equipment
ZHU Wenjuan1，LAI Yueshen1，ZHANG Yonggang1，CHANG Hong2，TU Jinlei3
( 1.School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710021, China; 2.Xi'an R&D Center, POLARIS ETEK, Xi'an 710065, China; 3.Beijing HengYang Technology Development Co., Ltd., Beijing 101300, China )
Abstract：According to the requirements of high frequency induction brazing process, and the characteristics of the pipe pieces which will be welded, an induction brazing equipment is designed. This paper focuses on the overall structure design of the equipment, which mainly includes the design of work fixture, the structural design of pneumatic parts, selection calculation of cam fragmentation mechanism, speed motor and cylinder. Work fixture system and heating system are integrated, so as to realize the automatic welding of the pipe pieces. The work fixture uses the method of combining quick clamp with three-joint centralizer device. Pneumatic part mainly uses cylinder and float joint to achieve the reciprocating movement of the sensor.
Key words：pipe pieces；multi station；induction brazing；automatic welding；work fixture
———————————————
收稿日期：2015－12－16
作者简介：朱文娟（1989－），女，江苏如皋人，硕士，主要研究方向为机电系统设计与控制。
- 下一篇：残膜回收机捡拾装置的研究
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS