金属波纹管平衡直径计算方法研究
曹景海1,张昕2
(1.中国石化长城能源化工(贵州)有限公司,贵州 贵阳 550081;2.四川日机密封件股份有限公司,四川 成都 610045)
摘要:焊接金属波纹管有效直径对于分析其应力状态和力学性能是一个关键参数,采用一般经验公式计算不能满足工程要求,因此在工程实践中,需对计算公式进行修正以减少设计误差。两种不同类型的“S”型曲线焊接金属波纹管被选来研究其有效直径变化规律。实验数据表明,焊接金属波纹管的有效直径不仅与波纹管的规格和尺寸有关,还受到波纹管介质压力状态的影响。根据实验数据,采用曲线回归和线性回归方法,对焊接金属波纹管直径计算公式进行修正,得到一个新的有效直径计算修正公式。通过进一步的实验验证,新的修正公式能够更为准确地反映焊接金属波纹管的有效直径,满足工程实践的要求。
关键词:机械密封;金属波纹管;平衡直径;回归分析
中图分类号:TH136 文献标志码:A doi:10.3969/j.issn.1006-0316.2017.09.007
文章编号:1006-0316 (2017) 09-0027-05
Study on Metal Bellows Balance Diameter Calculation Method
CAO Jinghai1,ZHANG Xin2
( 1.China Petrochemical Great Wall Energy Chemical (Guizhou) Co., Ltd., Guiyang 550081, China; 2.Sichuan Sunny Seal Co., Ltd., Chengdu 610045, China)
Abstract:Welded metal bellows effective diameter for the analysis of the stress state and mechanics performance is a key parameter. The method of calculating the effective diameter of the metal corrugated pipe by the general empirical formula is not sufficient to meet the engineering requirement. Therefore, in engineering practice, the calculation formula needs to be modified to meet the accuracy requirement. The two types of "S" curves of different types of weld metal bellows are selected to study their effective diameters. The experimental data shows that the effective diameter of the welded metal corrugated tube is not only related to the size and size of the corrugated pipe, but also the influence of the pressure state of the bellows medium. According to the experimental data, use the curve regression and linear regression method, the welding metal corrugated pipe diameter calculation formula for correction, get a new effective diameter correction formula calculation. Through further experiments, the new correction formula can more accurately reflect the effective diameter of welded metal bellows, and meet the requirement of engineering practice.
Key words:mechanical seal;metal bellows;balance diameter;regression analysis
———————————————
收稿日期:2017-05-02 
作者简介:曹景海(1971-),男,山东梁山人,本科,高级工程师,主要研究方向为设备状态监测与智能化管理。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS