基于AMESim的调压器的研究
冯艳明，戴钰冰，李明，童明炎，孙胜
（中国核动力研究设计院，四川 成都 610213）
摘要：介绍了调压器的作用、结构组成和工作原理，并根据调压器的主要结构组成与工作原理，结合实际工况下的调压器的各主要参数值，在AMESim环境下按照AMESim的仿真步骤及要求建立了调压器的AMESim仿真模型。基于该仿真模型对充入调压器的氦气的体积、调压器的橡胶囊的弹性系数等主要参数进行了仿真分析与研究，得出了调压器在调压过程中的温度、氦气压力、氮气压力等主要参数的变化规律以及充入调压器的氦气体积、调压器的橡胶囊弹性系数等主要参数对调压器调压特性的影响规律。
关键词：调压器；AMESim；调压特性
中图分类号：TM423 文献标志码：A doi：10.3969/j.issn.1006-0316.2018.02.011
文章编号：1006－0316 (2018) 02－0042－03
Research on Pressure Regulator Based on AMESim
FENG Yanming，DAI Yubing，LI Ming，TONG Mingyan，SUN Sheng
( Nuclear Power Institute of China, Chengdu 610213, China )
Abstract：This paper introduces the functions, composition and working principle of pressure regulator, and according to the main composition and working principle of the pressure regulator，combined with the main parameters of the regulator under actual operating conditions, the AMESim simulation model of the regulator is established under the AMESim environment according to the simulation steps and requirements of AMESim. Based on the simulation model, the main parameters such as the volume of the helium filled in the regulator, the elastic coefficient of the rubber capsule of the regulator and so on are simulated and studied. The changing rules of main parameters such as temperature, helium pressure and nitrogen pressure in the process of pressure regulation, as well as the influence of main parameters such as the volume of helium and the elastic coefficient of the rubber of the regulator on the pressure regulation characteristics of the regulator are obtained.
Key words：pressure regulator；AMESim；pressure regulation characteristics
———————————————
收稿日期：2017－03－30
作者简介：冯艳明（1987－），男，山西吕梁人，硕士研究生，研究实习员，主要从事放射性设备的设计与研究工作。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS