凿岩台车钻臂工作空间求解
刘泽鑫,管会生
(西南交通大学 机械学院,四川 成都 610031)
摘要:钻臂工作空间作为凿岩台车的主要参数,是研究凿岩台车的重要部分。以某型号台车钻臂为例,建立其三维模型。将钻臂简化为多关节机器人,简化过程中合并一些相同功能的杆件,尽量减少运动学方程中变量的个数;运用D-H方法建立其运动学方程,通过相应转换矩阵和坐标的运算,可以得到钎杆顶端在底板坐标系中的坐标值是各关节变量的函数,即工作空间的运动学方程;最后在MATLAB中根据建立的运动方程编程求解钻臂的工作空间。
关键词:凿岩台车钻臂;运动学方程;工作空间
中图分类号:TD421.2+4         文献标识码:A         文章编号:1006-0316 (2012) 05-0009-04
Workspace solution of drill jumbo boom
LIU Ze-xin,GUAN Hui-sheng
(College of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China)
Abstract:The boom workspace as the main parameters of Drill Jumbo is important part of Drill Jumbo research. Three-dimensional model of boom is established based on a type of Drill Jumbo boom. The boom can be simplified to a multi-joint robot, at the sametime mergering some parts which have the same function to reduce the number of variables in the kinematic equations; D-H method is used to establish the kinematic equations, though some corresponding computing between matrix and coordinate vector, and then get rod pole coordinate in basecap coordinate system are the function of each joint variables. At last using MATLAB to programing solve the boom workspace according to the kinematic equations established before.
Key words:drill jumbo boom;kinematics equations;workspace

———————————————
收稿日期:2011-12-02
作者简介:刘泽鑫(1986-),男,四川宜宾人,硕士研究生,主要研究方向为工程机械;管会生(1961-),男,四川成都人,教授,主要研究方向为机械设计。

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS