基于SolidEdge解决零件间匹配连接设计问题
孙黎义，毕庶国
（文登奥文机电设备有限公司，山东 威海 264400）
摘要：在产品设计或者改造过程中，外形设计往往有工业设计师提供，如何将这个外形与现有的零件外形匹配得天衣无缝将关系到产品设计的成败。如果两个零件做出模具件后发现它们之间有干涉，有时可以修复模具，有时则可能导致模具的报废。既影响了项目的进度，又浪费了资金。借助三维软件SolidEdge分别对相关的两零件进行造型，完成造型后，将两个零件按照装配关系进行正确的装配。然后对相匹配的两个零件进行布尔运算，从而有效地解决了两个零件之间正确匹配问题。
关键词：SolidEdge；布尔运算；零件匹配；匹配设计
中图分类号：TB472 文献标识码：A 文章编号：1006－0316 (2012) 08－0032－03
Solution the mate connection problems based on Solidedge software
SUN Li-yi，BI Shu-guo
（Wendeng Allwin Power Equipment Co., Ltd.，Weihai 264400，China）
Abstract：During the development and innovation of the productions, the appearance of the productions is usually designed by industrial designers. It‘s important to come true that the related contiguous parts connection match perfectly. After the moulds of some plastic parts or cast aluminum are finished, occasionally we find that the interference occurs among the contiguous parts. Sometimes the mould is able to be modified according to the designer’s purpose. Sometimes the finished mould isn’t able to be repaired and turns into trash finally. This will affect the progress of the project and waste the funds. We can design the related parts by 3D-software Solidedge. After the prototype of related parts are finished creating, we assemble the related parts in Solidedge Assemble Environment according to correct assembly relation. And then Boolean calculation will be apply between the two contiguous parts. The correct mate connection between the two parts is solved perfectly.
Key words：SolidEdge；Boolean calculation；parts mate；mate design———————————————
收稿日期：2011－12－09
作者简介：孙黎义（1975－），男，山东郓城人，本科，工程师，主要从事电动工具的研发工作。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS