50 t轧辊吊钳控制系统设计
刘存根，王大军，冯锦国
（中煤张家口煤矿机械有限责任公司 圆环链分厂，河北 张家口，075025）
摘要：钢铁行业中轧钢生产线上的工作轧辊磨损或变形后需要重新打磨或加工，就需要有一种工具来对磨损或变形以及加工好的工作轧辊进行吊装和搬移。50 t轧辊吊钳就是为了钢铁行业工作轧辊的吊装和搬移而设计的工具，额定载荷50 t，吊装和搬移工作轧辊范围为Ф630～850 mm，可以吊单根或同时吊两根工作轧辊，操作方式是无线遥控器控制。
关键词：50 t轧辊吊钳；控制系统；设计
中图分类号：TG580.23+5 文献标识码：A 文章编号：1006－0316 (2013) 04－0064－03
Design on the control system of 50T roller lifting machine
LIU Cun-gen，WANG Da-jun，FENG Jin-guo
( Round Link Chain Branch, Zhangjiakou Coal Mining Machinery Co. Ltd, China Coal,Zhangjiakou 075025, China )
Abstract：There are some work rollers in steel rolling product line of steel industry for lifting and moving when they are wearing down or deformation, so we need a tool to lift and move the work roller. 50T roller lifting machine is a toll for lifting and moving work roller in the thesis, which is mainly used to lift and move the work roller for steel industry, its specified loading is 50 tones, its working rang is from Ф630mm to Ф850mm of work roller, it can lift and move one work roller one time, it can life and move two work rollers simultaneously too, it is controlled by the wireless remote controller.
Key words：50 t roller lifting machine；control system；design
———————————————
收稿日期：2012－10－25
作者简介：刘存根（1971－），男，河北宣化人，本科，工程师，主要从事设备机电的维护、改造和设计工作。
- 上一篇：一种多用真空吸具的设计
- 下一篇：液压等分回转台的设计应用
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS