交流变频调速技术在矿井提升机调速控制系统中的应用
唐先春
(成都工业学院,四川 成都 611730)
摘要:矿井提升机是煤矿生产过程中的关键设备,其性能好坏直接影响矿山生产的效率与安全。目前,提升机主要采用交流电动机转子串、切电阻的传统调速方式,此类方案成本高、可靠性低。因此,利用可编程控制技术(PLC)、交流变频调速技术等处理方法,旨在实现提升机安全、可靠的速度控制。试验结果表明,利用PLC功能控制变频器的输出信号,使得提升机能够在给定速度与位置运行,从而减少事故发生,延长电气设备使用寿命,具有一定的实用性与经济性。
关键词:交流变频;PLC;提升机;调速
中图分类号:TD534            文献标识码:A          文章编号:1006-0316 (2013) 05-0051-04
Application of AC variable frequency speed control technology in mine hoist speed control system
TANG Xian-chun
( Chengdu Technological University, Chengdu 611730, China )
Abstract:Mine hoist is the key equipment in the production process of coal mine, its performance directly influences the efficiency and safety of mine production. At present, hoist mainly adopts the traditional control mode of the AC motor rotor, cutting resistance, which is high cost, low reliability program. Therefore, this research uses the programmable control technology (PLC), AC variable frequency speed control technology, aimed at the realization of elevator's safety, reliable speed control. The test results show that using the PLC control inverter output signal, the hoisting machine can run at a given speed and position, so as to reduce accidents, prolong the service life of electrical equipment. It has certain practicability and economy.
Key words:AC frequency converter;PLC;hoist;speed control

———————————————
收稿日期:2012-11-13
基金项目:四川省教育厅重点项目:智能磁流变阻尼器的研制(08ZB070)
作者简介:唐先春(1970-),男,重庆人,硕士,高级工程师,主要研究方向为机电一体化、数控机床控制。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS