PDP研磨机无接触防水系统
彭俊林
(四川虹欧显示器件有限公司,四川 绵阳 621000)
摘要:在PDP生产制造过程中,基板玻璃研磨加工过程中要使用冷却水,以防止磨焦和得到光滑的边缘,同时要求完全防止冷却水溅射到基板玻璃。随着PDP产品升级换代,尤其是第4代PDP窄边框产品,还要保证表面电极不受划伤。首先对PDP面板研磨工艺和生产设备进行介绍,然后根据4代产品对研磨工艺的要求,提出了一种利用水流密封、毛刷与屏不产生接触的防水装置的设计方案。
关键词:PDP;研磨机;防水;无接触
中图分类号:TG580.68         文献标志码:A          文章编号:1006-0316 (2014) 03-0043-04
A non-contact waterproof system for grinding equipment of PDP production
PENG Jun-lin
( Sichuan COC Display Devices co., Ltd., Mianyang 621000, China )
Abstract:In the PDP manufacturing process, Glass grinding process use the cooling water in order to prevent the grinding burn and achieve smooth edge,And the cooling water is completely prevented from splashing into the glass. With the PDP product upgrading, especially in the 4th generation PDP narrow frame products, the surface electrode also prevent from scratching in grinding process. This article first briefly introduces the PDP panel grinding process and production equipment, then according to the 4th generation product grinding processing requirement, In this paper, a waterproof device scheme is designed, using the water seal and brush untouching with the glass.
Key words:PDP;gringding;machine;worterproof;untouching
 
———————————————
收稿日期:2013-09-22
作者简介:彭俊林(1979-),男,四川绵阳人,学士,设备工程师,主要从事PDP生产线和设备的运营和管理工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS