MPV一体化立柱内饰结构设计
孙成武,任婷婷,陈林萍
(安徽江淮汽车股份有限公司 技术中心,安徽 合肥 230601)
摘要:介绍了MPV高低配车型内饰板差异,着重说明了高低配车型立柱内饰的结构设计。其中,高配车型立柱内饰采用全包覆,利用顶棚和饰板的搭接配合装饰立柱钣金,低配车型立柱内饰采用半包覆,仅利用饰板遮挡近地板部分的立柱钣金。通过不同结构的饰板共用同一立柱钣金来丰富内饰配置,拓展了同一车型的市场。
关键词:MPV;立柱内饰;结构设计
中图分类号:U463 文献标志码:A doi:10.3969/j.issn.1006-0316.2015.01.014
文章编号:1006-0316 (2015) 01-0055-03
Structural design of pillar trim in mpv by sharing pillar panel
SUN Cheng-wu,REN Ting-ting,CHEN Lin-ping
( Jianghuai Automobile Co.Ltd, Hefei 230601, China )
Abstract:This article introduced the differents of pillar trim between high level and low level in MPV, structural design of pillar trim was focused. The high level pillar trim is full cover, to trim pillar panel with using the overlap between headlining and plastic plates, the low level pillar trim is half cover, just used the plastic plates to cover the half pillar panel near the floor. To enrich interior configuration by sharing pillar panel with different interior trim structure, the market of one model was expanded.
Key words:MPV;pillar trim;structural design
———————————————
收稿日期:2014-06-10
作者简介:孙成武(1987-),男,安徽滁州人,工学硕士,工程师,主要研究方向为汽车软内饰材料结构设计。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS