展台专用锁扣结构设计与分析

 刘虹,陈仁栓,杨欢

(合肥工业大学 机械与汽车工程学院,安徽 合肥 230009)
摘要:针对展台的结构以及使用过程中出现的问题,设计了一套展台专用的锁扣。对锁扣工作原理做简要说明,然后针对设计中主要涉及的摩擦力计算和压簧设计进行详细阐述,最后在SolidWorks三围软件中对转轴建模,并对锁扣转轴的受力进行有限元分析,根据软件最终分析结果,转轴的应力与应变都是在许可范围内,从而验证了设计的可行性。
关键词:锁扣;展台;有限元分析
中图分类号:V229+.4 文献标志码:A doi:10.3969/j.issn.1006-0316.2015.04.011
文章编号:1006-0316 (2015) 04-0046-03
The design and ANSYS of special lock of the table for exhibits
LIU Hong,CEHN Renshuan,YANG Huan
( School of Mechanical and Automotive Engineering, Hefei University of Technolngy, Hefei 230009, China )
Abstract:On the study of the structure of the table for the exhibits and the problems fround in using process, we design a special lock of the table for exhibits. First, introduce the relevant background information of the design, and explan briefly the working principle of the lock, the second, detail the calculation of friction and pressure spring design, at last modeling the ratating shaft in SolidWorks and have the finite element simulatiom on SolidWorks Simulation, the stress and strain of ratating shaft are safe according to the analysised result of software,so the design is feasible. 
Key words:lock;the table for exhibits;the finite element analysis
———————————————
收稿日期:2014-11-19
作者简介:刘虹(1961-),女,安徽枞阳人,副教授,硕士生导师,主要研究方向为图学理论与应用、计算机图形学。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS