某型乘用车车门刚度分析
付景顺，丁鸿儒
（沈阳工业大学 机械工程学院 车辆工程系，辽宁 沈阳 110870）
摘要：车门的下垂刚度是车门刚度设计中重要指标之一，也是汽车重要力学性能之一。针对某型乘用车车门的下沉刚度问题，以线性有限元理论为基础，运用ANSA建立车门的有限元模型并划分网格，利用MSC. Nastran对该乘用车车门进行下垂刚度分析，计算出该车门的刚度值，并根据该刚度值得到该车门的位移云图和应力云图。通过对其弯曲、扭转刚度的分析，验证车门不同位置的受力情况，获得该车门最薄弱的位置，验证该车门是否合理、可靠，有利于进一步提高车门的装配质量。
关键词：车门；刚度分析；有限元
中图分类号：U270.38+6 文献标志码：A doi：10.3969/j.issn.1006-0316.2015.05.011
文章编号：1006－0316 (2015) 05－0039－03
Stiffness analysis of a certain type of passenger car door
FU Jingshun，DING Hongru
( Department of Vehicle Engineering, School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870, China )
Abstract：The door of the sinking stiffness is one of the important index in the design of the door stiffness. Body stiffness is one of the important mechanical properties of the car. The FE model of one kind of car door is set up in order to solve the problem of its sag, which is on the basis of the linear finite element theory. To establish finite element model of the car door and mesh with ANSA. And using MSC. Nastran to get the sagging stiffness analysis of the car door, and calculating the stiffness of the car door. By analysis to the door’s bending and torsional stiffness, the stress characteristics of the different parts of the car structure are researched, the reasonability and reliability of theoretical modeling analysis are verified. According to the results of the stiffness, which can get the displacement nephogram and the stress nephogram and then getting the car door’s weakest position.
Key words：door of car；stiffness analysis；FE
———————————————
收稿日期：2014－10－17
作者简介：丁鸿儒（1990－），辽宁辽阳人，硕士研究生，主要研究方向为车辆的智能检测与维修。
- 上一篇：MPV车型顶棚与外饰玻璃的配合研究
- 下一篇：基于有限元分析的空滤器支架轻量化设计
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS