滚筒破碎机上的滚筒切削加工

 姚永星,卢国元

(中核浙江衢州铀业有限责任公司,浙江 衢州 324007)
摘要:滚筒破碎机在使用过程中,由于介质的硬度、尖锐程度较高,极易造成滚筒产生磨损,磨损表面的沟槽、凹痕深度不均匀,需要频繁修复。旨在探索利用滚筒传动机构安装切削装置,在不拆卸滚筒的情况下,完成对磨损滚筒的快速修复。
关键词:滚筒;磨损;切削
Cutting drum roll crusher
YAO Yongxing,LU Guoyuan
( Nuclear Zhejiang Quzhou Uranium Industry Limited Liability Company, Quzhou 324007, China )
Abstract:roll crusher in use, due to the high hardness, sharpness media, can easily cause the drum to produce wear trench worn surface, the uneven depth of the dent, requiring frequent repair. This article aims to explore the use of the roller drive mechanism mounted cutting device, without dismantling the drum, complete the quick fix for worn rollers.
Key words:drum;wear;cutting
———————————————
收稿日期:2014-06-20
作者简介:姚永星(1961-),江苏扬州人,大专,工程师,主要研究方向为机械工程;卢国元(1983-),四川成都人,本科,工程师,主要研究方向为机械工程。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS