光固化快速成型精度分析及实验研究

 朱超,宋莉莉,孙万麟

(昌吉学院 物理系,新疆 昌吉 831100)
摘要:光固化快速成型技术已成为国内外公认为发展最早且最迅速的成型方法,但采用此方法成型出的零件精度一直不高,困扰着光固化快速成型制造业,限制了此技术的实际应用和推广。针对成型精度不高的问题,提出采用精度补偿策略进行实验研究方法,对影响光固化精度的不同因素做了分析与探讨,同时进行了相关的试验与理论计算,并对试验中出现的尺寸误差分析了其产生的原因,总结了相应的规律,这将对后期技术的改进及深入研究提供理论依据。
关键词:快速成型;光固化成型;精度控制
中图分类号:TG665 文献标志码:A doi:10.3969/j.issn.1006-0316.2015.09.006
文章编号:1006-0316 (2015) 09-0020-05
Stereolithography analysis and experimental study of precision
ZHU Chao,SONG Lili,SUN Wanlin
( Department of Physics, Changji University, Changji 831100, China )
Abstract:Stereolithography technology has become a well-recognized as the development of the earliest and the most rapid molding method, but this method has been formed out of part accuracy is not high, plagued by stereolithography manufacturing, limits the practical application and promotion of this technology. In this paper, the problem of high precision molding, precision compensation strategy proposes the use of experimental methods, different factors affecting the accuracy of light-cured to do the analysis and discussion, at the same time carried out the relevant tests and theoretical calculations, and the size of the test appears error analysis of its causes, summarized the relevant law, which will improve and in-depth study of the late technology provide a theoretical basis. 
Key words:rapid prototyping;UV curing;precision control
———————————————
收稿日期:2015-04-29
基金项目:昌吉学院研究生启动基金(2014SSQD002);昌吉学院科研重点资助项目(2013YJZD002)
作者简介:朱超(1986-),男,新疆奇台县人,硕士,主要研究方向为机械电子工程;宋莉莉(1987-),女,山东淄博人,硕士,讲师,主要研究方向为控制工程与控制理论;孙万麟(1983-),女,甘肃白银人,讲师,主要研究方向为数字信号、图像处理及信息技术。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS