多学科优化技术在转管机枪活塞结构改进设计中的应用研究
张军挪1，化斌斌1，康小勇1，孙也尊2
（1.军械工程学院 火炮工程系，河北 石家庄 050003；2.驻207厂军事代表室，山西 太原 030009）
摘要：针对某型转管机枪试验中出现的活塞断裂问题，利用有限元理论对活塞进行分析，找出了故障发生的原因，并以活塞最大应力为目标函数，采用最优拉丁超立方设计方法来对活塞结构参数进行灵敏度分析。以对应力影响比较大的结构参数作为设计变量，构建了有限元分析响应面近似模型，利用iSight软件集成有限元程序，采用自适应模拟退火算法对活塞结构进行了多学科并行优化设计，优化结果显示，活塞的最大应力得到显著减小。
关键词：多学科优化；转管机枪；活塞；有限元
中图分类号：TJ25 文献标志码：A doi：10.3969/j.issn.1006-0316.2015.12.001
文章编号：1006－0316 (2015) 12－0001－04
Research on structural design and improvement of gatling gun piston based on multi-disciplinary optimization
ZHANG Junnuo1，HUA Binbin1，KANG Xiaoyong1，SUN Yezun2
( 1.Artillery Engineering Department, Ordnance Engineering College, Shijiazhuang 050003, China;2.Military Representative Office of 207 Factory, Taiyuan 030009, China )
Abstract：Aiming at the problem of piston fracture of Gatling gun in test, finite element theory is used to analyze the piston to find the fault cause. Then taking the maximum stress of piston as the goal function, Optimal Latin hypercube design (Opt LHD) is used to analyze sensitivity of piston structure parameters. The parameters effecting stress sensitively are taken as design variables to build response surface model of finite element model, and the finite element program is integrated with iSight, then Adapted Simulated Annealing(ASA) is used to optimize the piston structure by multi-disciplinary collateral design and optimization method. The optimization result display that the maximum stress decreases evidently.
Key words：multi-disciplinary optimization；gatling gun；piston；finite element
———————————————
收稿日期：2015－04－03
作者简介：张军挪（1978－），男，河南商水人，博士，讲师，主要研究方向为武器系统动力学理论与应用。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS