CATIA V6三维设计轮机建库关键技术
卢永进，吴波，林锐，宋一淇，凌朝晖
（中国舰船研究设计中心，湖北 武汉 430064）
摘要：轮机建库是船舶设计的重要组成部分。为探索CATIA V6软件三维设计轮机建库的核心技术，本文从建库总体框架、工程技术表定义、标准件库构建、过滤器定义四个方面进行深入分析，详细介绍了CATIA V6轮机建库操作流程，并对工程技术表和标准件库创建过程中的重要事项进行说明。相关成果对CATIA V6软件三维管路设计具有较高参考价值。
关键词：CATIA V6；轮机；建库；三维设计
中图分类号：TP391 文献标志码：A doi：10.3969/j.issn.1006-0316.2016.08.005
文章编号：1006－0316 (2016) 08－0023－04
Key Technologies of the Three-Dimensional Engine Database Foundation based on CATIA V6 Software
LU Yongjin，WU Bo，LIN Rui，SONG Yiqi，LING Zhaohui
( China Ship Development and Design Center, Wuhan 430064, China )
Abstract：Engine database foundation is an important part of ship design. In order to explore the key technologies of CATIA V6 software on database foundation of the marine engineering, overall framework, basic engineering technological tables definition, piping part catalog establishment, creating filters were systematically discussed. Moreover, the process and the points for attention of the three-dimensional engine database foundation in CATIA V6 were illustrated in details. The results show that it′s valuable for applying to the CATIA V6 3D piping design.
Key words：CATIA V6；marine engineering；database foundation；three-dimensional design
———————————————
收稿日期：2016－01－14
作者简介：卢永进（1982－），男，四川泸县人，博士，工程师，主要研究方向为船舶推进系统设计和船舶设计信息化。
- 上一篇：短电弧加工工具电极损耗研究
- 下一篇：基于模态分析的倒装焊焊点开裂缺陷检测方法研究
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS